Stationary Lattice Tower

 

Available now for immediate delivery is an LMS 65-250 ST. They are designed to provide years of service with strength and durability designed at their core.

Below are just a few of the features of our stock LMS ST features:

  • Optional Hinged Base
  • Tower hot-dipped galvanized finish EN ISO 1461 / ASTM A123 / CSA G164 for all-weather
  • Full Steel Decking to Easily Accommodate Mounting of All Equipment Requirements
  • Ready to be deployed in a matter of minutes
  • Patented derlin mast guide blocks
  • (4) Multi-Position Outriggers with Jacks for Stabilization
  • 4″, 5″, 6″ galvanized steel smart custom bearings fitted pulleys marinated in LPS3 All Eco-guard (TM) Eco coated grade 9 bolts. A coating that meets 1000 hrs of salt spray corrosion resistance for maximum tensile strength of 180,000 PSI
  • The main drive lift motor is wash down direct drive worm gear extreme environment with moisture drain. Optional stainless IP65 rated motor upgrade.
  • An excellent choice for classified sites as well as embassy deployments.
  • Three sectors pivoting antenna mount/custom mount designs available
  • Cable guide rings each section
  • Certified -80 – 140 Fahrenheit conditions

For more information regarding the LMS ST 65-250 Tower, Contact one of our seasoned sales professionals. They will instruct you with custom options that come with all Landa Mobile Systems products. Stapled with our manufacturers and lifetime warranty.

large microwave dish torqe arms
 

LMS 65′ – 250′ ST

 

  • Section legs ASTM A500-07, A53-12, Grade B, U.S. Carbon Steel Lifetime Warranty 
  • Optional HSS ASTM DOM Section Legs Lifetime Warranty
  • Custom antenna mounts, your choice
  • Tower hot-dipped galvanized finish EN ISO 1461 / ASTM A123 / CSA G164 for all-weather
  • 25′ full operation remote control cable option
  • Patented derlin mast guide blocks
  • All tower sections are operated only with certified 3/8″ diameter 7/19 galvanized aircraft quality cable
  • All cables have been marinated in LPS3 for long life anti-corrosion for harsh saltwater environments. Certified break strength of 14,000 Lb.
  • 4″, 5″, and 6″ galvanized steel smart custom bearings. Fitted pulleys soaked in LPS3 All Eco-guard (TM). Eco coated grade 9 bolts coating that meets 1000 hrs of salt spray corrosion-resistance too a maximum tensile strength of 180,000 PSI.
  • The main drive lift motor is wash down direct drive worm gear extreme environment with moisture drain. Optional stainless IP65 rated motor upgrade.
  • An excellent choice for classified sites as well as embassy deployments.
  • Three sectors pivoting antenna mount/custom mount designs available
  • Cable guide rings each section
  • Certified -80 – 140 Fahrenheit conditions
  • Nine position guy kit
  • 110VAC 60 HZ / optional 240VAC 50 Hz
  • Patented derlin mast guide blocks
  • Patent-pending clad kit installed and derlin friction slider
  • Stationary or optional Hinged Base Telescopic Tower 

Safety Features

  • Meets and exceeds TIA/EIA-222-F & G 
  • 120 MPH wind rated with guy wires attached, 1500 Lb tower payload
  • Climbable man-rated tower when equipped with optional safety climb
  • Heavy-duty upper and lower limit switches
  • Ingress protection, weatherproof (locking) control panel
  • Illuminated function lamps for telescopic single switch operation
  • 1 Ea red keyed power disconnect for all function controls
  • Galvanized steel safety guards in place on all rotatable components per “OSHA Safety Guard Standards” on all rotatable. Lifetime Warranty
  • Protective grate screen over dual cable rotatable drums, as well as end shafts. Lifetime Warranty
  • Back-up powerless key operation allowing the tower to be raised or lowered with a cordless drill 
  • Emergency back-up redundant key Lifetime Warranty
  • Built-in locking system with multiple safety features
  • Redundant tower retraction cable system
  • LMS never fail key system include both tilt and erection manual back up systems. Lifetime Warranty 

 

Retracted Heights for Working on Antennas 

 

  • 85′ tower / retracted height 26′
  • 106′ tower / retracted height 27.5′ 
  • 120′ tower / retracted height 36.5′
  • 150′ tower / retracted height 38′
  • 250′ tower / retracted height 44′
  • All towers with star mount add 5′ to heights

Shipping and Weights

  • 85′  3900 Lbs 
  • 106′ 4200 Lbs
  • 120′ 5400 Lbs
  • 150′ 5700 Lbs
 

Certified Tower Manufacturer

 

The tower has been analyzed utilizing the commercially available software TNX Tower version 6.0.0.8 (previously known as RISA Tower & ERI Tower) constructed with ASTM A500, Grade B/C Carbon steel schedule 40, (exceeding minimum 55.3 KSI ASTM) standards yield strength in constructing the complete tower assembly. 

 

browse our products